YT30 cemented carbide cutting inserts, the equivalent of ISO grouping code K30. Its density is 9.4 ~ 9.6g/cm ³, bending strength of not less than 1200 N / MM ², hardness of not less than 93.2HRA. YT30 cemented carbide wear resistance and cutting speed cutting blades running higher than YT15, but poor impact toughness intensity of use. Currently, there are hundreds of different components of WC-based cemented carbide, the majority of them are using the cobalt (Co) as a binder, a nickel (Ni) and chromium (Cr) element is commonly used binding agent, also can add other Some alloying elements. YT30 cemented carbide cutting inserts which applies to carbon steel and alloy steel finishing, such as the small section of fine cars fine boring, fine expansion.
2014年6月18日星期三
YT30 Cemented Carbide Cutting Inserts Introduction
YT30 cemented carbide cutting inserts, the equivalent of ISO grouping code K30. Its density is 9.4 ~ 9.6g/cm ³, bending strength of not less than 1200 N / MM ², hardness of not less than 93.2HRA. YT30 cemented carbide wear resistance and cutting speed cutting blades running higher than YT15, but poor impact toughness intensity of use. Currently, there are hundreds of different components of WC-based cemented carbide, the majority of them are using the cobalt (Co) as a binder, a nickel (Ni) and chromium (Cr) element is commonly used binding agent, also can add other Some alloying elements. YT30 cemented carbide cutting inserts which applies to carbon steel and alloy steel finishing, such as the small section of fine cars fine boring, fine expansion.
订阅：
博文评论 (Atom)
没有评论:
发表评论