K30 Tungsten Carbide Burrs Introduction

K30 tungsten carbide burrs hardness of not less than 91.5HRA, alloy ultrafine particles are mainly suitable for low speed rough turning, milling heat-resistant alloys and titanium, for better cutters and taps, blade cutter effect. Flexural strength of not less than 2200N/mm ², density 14.4 g / cm ³ into the 14.6g/cm ³ range, the amount of tungsten carbide comprising between 89% and 95%, the amount of cobalt contained in the 5% to 8% range inside, the amount of titanium containing 0% to 1%, containing tantalum content of 0% to 2% range. Typically K30 tungsten carbide burrs is also known as K30 high-speed Assorted Carbide cutters, carbide die cutters, etc., under normal circumstances with high-speed electric grinder or supporting the use of pneumatic tools.