YD201 cemented carbide cutting inserts, the equivalent of ISO grouping code K20. Density of 14.89g/cm ³, flexural strength of not less than 1800MPa, the hardness of not less than 91.0HRA. Because of its good performance, YD201 light alloy often used for semi-finishing and roughing light alloys can also be used as a low-alloy steel and cast iron milling. Cutting Tools directly affect productivity, process quality and production costs. The primary cutting tools depends on the material of the cutting portion, followed by the design and selection of geometry and tool structure is reasonable. In the course of using the blade, wear will inevitably common edge wear, improved ways to reduce the cutting speed, feed rate increase, or the use of a coating knife.
2014年6月9日星期一
YD201 Cemented Carbide Cutting Inserts Introduction
YD201 cemented carbide cutting inserts, the equivalent of ISO grouping code K20. Density of 14.89g/cm ³, flexural strength of not less than 1800MPa, the hardness of not less than 91.0HRA. Because of its good performance, YD201 light alloy often used for semi-finishing and roughing light alloys can also be used as a low-alloy steel and cast iron milling. Cutting Tools directly affect productivity, process quality and production costs. The primary cutting tools depends on the material of the cutting portion, followed by the design and selection of geometry and tool structure is reasonable. In the course of using the blade, wear will inevitably common edge wear, improved ways to reduce the cutting speed, feed rate increase, or the use of a coating knife.
订阅：
博文评论 (Atom)
没有评论:
发表评论