YT5 tungsten carbide burrs strength not less than 89.5HRA, density ranged from 12.5 g / cm ² between 13.2g/cm ². Mainly for the role, including carbon steel and alloy steel forgings, stampings and castings skin when cutting uneven surface roughing, rough planing, semi-refined planing, rough milling and discontinuous surface rough milling and drilling and so on. Flexural strength of not less than 1430MPa, comprising 69% to 92% of the tungsten carbide component, a cobalt component comprising 5% to 10% range, the titanium-containing component is between 5% and 15% between 0% to 15 comprising % range tantalum ingredients. YT5 burrs can not only finishing a variety of metal mold cavity, you can also clean up the casting, forging, welding pieces flying edge, burr and weld.
2014年7月17日星期四
YT5 Tungsten Carbide Burrs Introduction
YT5 tungsten carbide burrs strength not less than 89.5HRA, density ranged from 12.5 g / cm ² between 13.2g/cm ². Mainly for the role, including carbon steel and alloy steel forgings, stampings and castings skin when cutting uneven surface roughing, rough planing, semi-refined planing, rough milling and discontinuous surface rough milling and drilling and so on. Flexural strength of not less than 1430MPa, comprising 69% to 92% of the tungsten carbide component, a cobalt component comprising 5% to 10% range, the titanium-containing component is between 5% and 15% between 0% to 15 comprising % range tantalum ingredients. YT5 burrs can not only finishing a variety of metal mold cavity, you can also clean up the casting, forging, welding pieces flying edge, burr and weld.
订阅：
博文评论 (Atom)
没有评论:
发表评论