K01 tungsten carbide bar hardness of not less than 92HRA, flexural strength of not less than 1320N/mm², density 14.6g/cm³ into 15.2g/cm ³ range. Mainly by the use of tungsten carbide and cobalt powder metallurgy method by mixing flour, milling, pressing, sintering, and has good abrasion resistance and flexural strength. Tungsten carbide in an amount in the range of 84% to 90%, the cobalt content is between 4% and 7%, the amount of titanium contained in the 0% to 1% plus or minus, tantalum amount ranging from 0% to 2% . It uses a very broad range, ingredients for different purposes carbide strip of tungsten carbide and cobalt are not consistent, the main component of tungsten carbide and cobalt alloys.
2014年7月24日星期四
K01 Tungsten Carbide Bar Introduction
K01 tungsten carbide bar hardness of not less than 92HRA, flexural strength of not less than 1320N/mm², density 14.6g/cm³ into 15.2g/cm ³ range. Mainly by the use of tungsten carbide and cobalt powder metallurgy method by mixing flour, milling, pressing, sintering, and has good abrasion resistance and flexural strength. Tungsten carbide in an amount in the range of 84% to 90%, the cobalt content is between 4% and 7%, the amount of titanium contained in the 0% to 1% plus or minus, tantalum amount ranging from 0% to 2% . It uses a very broad range, ingredients for different purposes carbide strip of tungsten carbide and cobalt are not consistent, the main component of tungsten carbide and cobalt alloys.
订阅：
博文评论 (Atom)
没有评论:
发表评论