Intensity of use YG3 tungsten carbide drawing dies and moderate impact toughness, wear resistance slightly higher than YG3X Carbide drawing dies. Drawing die not under stress conditions is mainly applied to the drawn diameter <3mm steel, non-ferrous metals and their alloys wire or wire rod. Hardness of not less than 91HRA, 15.0g/mm ³ density range into the 15.3g/mm ³, bending strength is about 1200MPa. Have a certain shape of the hole all centers, round, square, octagonal, or other special shapes. Has a strong compressive pressure can be used. Carbide brittle nature, can not guarantee that it does not break. Therefore, extreme caution when handling. As a high-quality carbide core, with high hardness, good thermal conductivity, low coefficient of friction characteristics.2014年5月8日星期四
YG3 Tungsten Carbide Drawing Dies Introduction
Intensity of use YG3 tungsten carbide drawing dies and moderate impact toughness, wear resistance slightly higher than YG3X Carbide drawing dies. Drawing die not under stress conditions is mainly applied to the drawn diameter <3mm steel, non-ferrous metals and their alloys wire or wire rod. Hardness of not less than 91HRA, 15.0g/mm ³ density range into the 15.3g/mm ³, bending strength is about 1200MPa. Have a certain shape of the hole all centers, round, square, octagonal, or other special shapes. Has a strong compressive pressure can be used. Carbide brittle nature, can not guarantee that it does not break. Therefore, extreme caution when handling. As a high-quality carbide core, with high hardness, good thermal conductivity, low coefficient of friction characteristics.
订阅：
博文评论 (Atom)
没有评论:
发表评论