YL10.1 Tungsten Carbide Bar Introduction

YL10.1 tungsten carbide bar hardness of not less than 91.5HRA, has good wear resistance and stiffness. Mainly by a mix of tungsten carbide and cobalt powder metallurgy method by milling, ball milling, pressing, sintering, has good wear resistance and flexural strength. Flexural strength of not less than 1900N / mm², density is about 14.9g / cm³, an amount in the range of tungsten carbide containing 90% to 96%, the cobalt content is between 4% and 7%, the amount of titanium contained in the 0 % ~ 1% plus or minus, containing tantalum content is 0% to 2% range. The main components of tungsten carbide and cobalt alloys, the use of a very wide range of different uses ingredients strip of tungsten carbide and cobalt are not consistent. Alloy strip is one of a number of materials, predominantly in a stripe shape.

YL10.1 tungsten carbide bar requires confirmation process after processing the next process and then be machined surface defect-free in order to protect the quality of products free of defects. Its excellent overall performance, wear good weldability. Also has high strength, toughness and hardness. Mainly in the form of existence of the sintered tungsten carbide is tungsten carbide particles on the "glue" the cobalt and / or nickel binder matrix.