K35 tungsten carbide bar hardness of the alloy is not less than the hardness of 91.5 HRA, the bending strength of not less than 2200N/cm ². Density is about 14.5g/cm ³, mainly a mixture of tungsten carbide and cobalt powder metallurgy method adopted by milling, milling, pressing, sintering, and has good abrasion resistance and flexural strength. With WC amount in the range of 83% to 89%, the cobalt content is between 5% and 8%, the amount of titanium contained in the 0% to 1% plus or minus, containing tantalum amount ranging from 0% to 2% . Many long carbide is a material, primarily in a stripe shape. The main components of tungsten carbide and cobalt alloys, different uses ingredients of tungsten carbide long and cobalt are not consistent, the use of a very broad range.
2014年7月30日星期三
K35 Tungsten Carbide Bar Introduction
K35 tungsten carbide bar hardness of the alloy is not less than the hardness of 91.5 HRA, the bending strength of not less than 2200N/cm ². Density is about 14.5g/cm ³, mainly a mixture of tungsten carbide and cobalt powder metallurgy method adopted by milling, milling, pressing, sintering, and has good abrasion resistance and flexural strength. With WC amount in the range of 83% to 89%, the cobalt content is between 5% and 8%, the amount of titanium contained in the 0% to 1% plus or minus, containing tantalum amount ranging from 0% to 2% . Many long carbide is a material, primarily in a stripe shape. The main components of tungsten carbide and cobalt alloys, different uses ingredients of tungsten carbide long and cobalt are not consistent, the use of a very broad range.
订阅：
博文评论 (Atom)
没有评论:
发表评论