High Hardness Steel Ball With a Two-edged Tungsten Carbide End Mills

For high hardness steel machining and cutting the number is 2, blade length Duanren type blade for ball-type tungsten carbide end mills called high hardness steel carbide end mill with a two-edged ball. High hardness steel ball with a two-edged tungsten carbide cutter model for CBN-BEM2N, helix angle of the groove is 30 °, high hardness steel machining direction is a full range of processing. High hardness steel ball with a two-edged tungsten carbide end mill is used in the preparation of ultrafine particles made of tungsten carbide coating uses excellent durability CBN, suitable for pre-hardened steel, high hardness steel, fine processing, enabling high-quality finishing.

High Hardness Steel Spiral With Multi-blade Duanren Tungsten Carbide End Mills

For high hardness steel machining and cutting the number of 5,6,8, etc., the blade length Duanren type spiral blade is called tungsten carbide end mills with more high hardness steel spiral tungsten carbide blade Duanren cutter. High hardness steel have TSC-MSXS TSC-GSXS two kinds of multi blade Duanren spiral carbide cutter model, helix angle of its groove is 50 °, high hardness steel machining direction is carried out side and beveled processing. High hardness steel blade with more Duanren spiral carbide end mill is used in the preparation of ultrafine particles made of carbide coating is used for cutting of high hardness steel and the development of special coatings TS, is best suited for cutting 65HRC following materials and coating high hardness steel, rigid corners superior protection type cutter.

High Hardness Steel Blade With a More Long-Edge Spiral Tungsten Carbide End Mills Introduction

For high hardness steel machining and cutting the number of 5,6,8, etc., as long blade length of edge, the edge of the spiral tungsten carbide end mills called high hardness steel blade with a more long-edge tungsten carbide spiral cutter. High hardness steel blade with a more long-edge spiral carbide cutter model for TSC-MSXL, helix angle of the groove is 50 °, high hardness steel machining direction is carried out and beveled side processing. High hardness steel blade with a more long-edge spiral tungsten carbide end mill is used in the preparation of ultrafine particles made of carbide coating is used for cutting of high hardness steel and the development of special coatings TS, even hardness the high hardness of 65HRC steel cutting can be performed without tremor.

High Hardness Steel Blade With a Multi-Standard Flat Head Tungsten Carbide End Mills

For high hardness steel machining and cutting the number of 5,6,8, etc, head for flat tungsten carbide end mills called high hardness steel blade with a multi-standard flat tungsten carbide end mills. High hardness steel blade with a multi-standard flat tungsten carbide cutter model XCP-GSXR. Its blade length standard, helix angle grooves is 50 °. High hardness steel blade with a multi-standard flat tungsten carbide end mill for high hardness steel machining direction is carried out and beveled side processing. High hardness steel blade with a multi-standard flat tungsten carbide end mill is used in the preparation of ultrafine particles made of carbide coating is used for cutting of high hardness steel and the development of special coating XCP. High hardness steel blade with a multi-standard flat tungsten carbide end mills with high rigidity, the most suitable for multi-side cutting edge series.

Universal Multi-blade Straight Shank Tungsten Carbide End Mills

5,6,8 and many have teeth, in the form of straight shank handle, cutter head for the ball head or flathead tungsten carbide end mills called multi-blade straight shank tungsten carbide end mills. Divided according to use is divided into two kinds of general-purpose and economical. Universal multi-blade straight shank tungsten carbide end mill grades have MG-MEA40M and MG-MEA40L like. Multi-blade straight shank tungsten carbide end mills standard length series M- series and series two L- long, the end of the form, but the center of the blade, spiral angle of 40 °. Universal multi-blade straight shank tungsten carbide end mill suitable for HRC≤50 (HB460) of steel, stainless steel, cast iron, etc. milling.

Cheap Four-blade Straight Shank Tungsten Carbide End Mills

Has four teeth, in the form of straight shank handle, cutter head for the ball head or flathead tungsten carbide end mills called economical four-blade straight shank tungsten carbide end mills. Four blade straight shank tungsten carbide end mills can be divided according to their use economical general purpose end mills and milling cutter types. Cheap four-blade straight shank tungsten carbide end mill grades have ME-4EA30S ME-4EA30M two. ME-4EA30M economical four-blade straight shank tungsten carbide end mills standard length series M- series, and ME-4EA30S type milling cutter length series is S- short series, both ends of a double-edged blade form too center, helix angle is 30 °. Cheap four-blade straight shank tungsten carbide end mill suitable for HRC≤40 steel, stainless steel, cast iron.

High-speed Machining With a Double-edged Straight Shank Tungsten Carbide End Mills

Edged straight shank tungsten carbide end mill is a kind of two teeth, in the form of straight shank handle, cutter head for the ball head or flathead tungsten carbide end mills. In accordance with the use of high-speed processing can be divided into two-edged straight shank tungsten carbide end mills, tungsten carbide end mills and universal economy carbide end mills. High-speed machining with a double-edged straight shank tungsten carbide end mill grades for MN-2EA50M, its length series M- standard series, the end blade form all over the center of the helix angle of 50 °. High-speed machining with a double-edged straight shank tungsten carbide end mill suitable for Si content <12 aluminum, non-metallic, high-speed milling.

High-speed Machining With Multi-blade Circular Head Tungsten Carbide End Mills

High-speed machining with multi-blade circular carbide cutter head is a kind of 5,6,8, more teeth, the head of the arc cutter head tungsten carbide end mills. Can be divided according to use high-speed machining steel HRC <48 / cast iron end mills and high-speed machining hardened materials mills, their grades are MP-MTA40M and MH-MTA45M. Their length M- series are standard series, but its end is the center of the blade form, in the form of straight shank shank. Its helix angle speed machining steel HRC <48 / cast iron milling cutter for 40 °, high speed machining hardened materials end mill is 45 °. High-speed machining steel HRC <48 / cast iron suitable for suitable for steel, cast iron, high-temperature alloys, titanium, high-speed machining of hardened steel with tungsten carbide end mills, high-speed machining hardened materials suitable for use tungsten carbide end mills in high-speed milling of hardened steel.

Four Flat Blade Straight Shank Tungsten Carbide End Mills Introduction

Has four teeth, in the form of straight shank handle, cutter head for flat tungsten carbide end mills often called four-blade flat head straight shank tungsten carbide end mills, four-blade flat head straight shank tungsten carbide end mills is one for the MG - 4EA45M type carbide end mills. MG - 4EA35M type four-blade flat head straight shank tungsten carbide end mills length series M - standard series, in the form of a two-edged blade end through the center. Four tooth tungsten carbide milling cutter center, cylindrical flat nose end mill is 0.1 × 45 °, helix angle of 45 °, MG - 4EA35M type four-blade flat head straight shank carbide end mills can be used to HRC≤ 50 (HB 460) of steel, stainless steel, cast iron, etc. for processing.

Edged Flat Head Straight Shank Tungsten Carbide End Mills Introduction

MG - 2EA35M type edged straight shank tungsten carbide end mills flat because it has two teeth, shank type straight shank tools for flathead hence the name. MG - 2EA35M type edged straight shank carbide end mill flat head length series M - standard series, end through the center of the blade form. Two tooth carbide milling cutter center, cylindrical flat nose end mill is 0.1 × 45 °, helix angle of 35 °, MG - 2EA35M type edged straight shank tungsten carbide end mills flat head can be used to HRC≤ 50 (HB 460) of steel, stainless steel, cast iron, etc. for processing.

Tungsten Carbide End Mills Classification

Tungsten carbide end mills are generally divided into integral indexable end mills and end mills. When the time 3 ~ 20mm in diameter can be made integral end mills; when the diameter is between 12 ~ 50mm can be made indexable end mills. Monolithic tungsten carbide end mills are divided into standard helix angle and the large helix angle cutter, standard helix angle is usually 30 ° or 45 °; large helix angle is generally 60 °, the number of teeth is 2,4,6 teeth. 6 large helix angle milling cutter teeth cut smooth, radial cutting force, suitable for finishing. Standard helix angle milling cutter teeth less chip flutes, and have a 1 to 2 cutting edges through the center, suitable for hand roughing. Indexable carbide end mills can be divided in accordance with the structure and purpose of the ordinary type, drilling and milling type and helical type three. Indexable milling cutter diameter is small, the space occupied by clamping the blade is very limited, so the general use of pressure-hole. Road tablets can be divided into paperback and vertical pressure-hole pressure mounted blade hole and so on.