High Hardness Steel Blade With a More Long-Edge Spiral Tungsten Carbide End Mills Introduction

For high hardness steel machining and cutting the number of 5,6,8, etc., as long blade length of edge, the edge of the spiral tungsten carbide end mills called high hardness steel blade with a more long-edge tungsten carbide spiral cutter. High hardness steel blade with a more long-edge spiral carbide cutter model for TSC-MSXL, helix angle of the groove is 50 °, high hardness steel machining direction is carried out and beveled side processing. High hardness steel blade with a more long-edge spiral tungsten carbide end mill is used in the preparation of ultrafine particles made of carbide coating is used for cutting of high hardness steel and the development of special coatings TS, even hardness the high hardness of 65HRC steel cutting can be performed without tremor.

High Hardness Steel Blade With a Multi-Standard Flat Head Tungsten Carbide End Mills

For high hardness steel machining and cutting the number of 5,6,8, etc, head for flat tungsten carbide end mills called high hardness steel blade with a multi-standard flat tungsten carbide end mills. High hardness steel blade with a multi-standard flat tungsten carbide cutter model XCP-GSXR. Its blade length standard, helix angle grooves is 50 °. High hardness steel blade with a multi-standard flat tungsten carbide end mill for high hardness steel machining direction is carried out and beveled side processing. High hardness steel blade with a multi-standard flat tungsten carbide end mill is used in the preparation of ultrafine particles made of carbide coating is used for cutting of high hardness steel and the development of special coating XCP. High hardness steel blade with a multi-standard flat tungsten carbide end mills with high rigidity, the most suitable for multi-side cutting edge series.

High Hardness Steel Blade With a Multi-Standard Screw-Type Tungsten Carbide End Mills Introduction

High hardness steel blade with a multi-standard screw-type tungsten carbide end mill is a process for high-hardness steel knife and number 5,6,8 etc, blade length as the standard type, blade type tungsten carbide spiral cutter. High hardness steel blade with a multi-standard spiral tungsten carbide cutter models TSC-MSXR and TSC-GSXR two types of spiral groove angle of 50 °, high hardness steel machining direction is carried out and beveled side processing , using ultrafine particles prepared from cemented carbide, the coating is used for cutting of high hardness steel developed special coating TS, TS coating having superior oxidation resistance, high hardness, excellent rigid tip angle-protected cutter.

Universal Three Blade Straight Shank Tungsten Carbide End Mills

Universal three blade straight shank tungsten carbide end mill is a kind of three teeth, in the form of straight shank handle, cutter head for the ball head or flathead carbide end mills. Universal three blade straight shank tungsten carbide end mill grades have MG-3EA40S, MG-3EA40M, MG-3EA40L, MG-3EA40X, MG-3EA30M and MG-3EA30L like. Universal three straight shank tungsten carbide end mill blade length series standard series M-, L- long series, X- and S- extended series of short series of four, which ends in the form of three blade edge over the center of the helix angle there are two kinds of 30 ° and 40 °. Universal three-blade straight shank carbide end mills versatile, suitable for HRC≤50 (HB460) of steel, stainless steel, cast iron, etc. milling.

Universal Three Blade Tungsten Carbide Ball Nose End Mills Introduction

Tungsten carbide end mills due to having three teeth, cutter head for the ball mill, and therefore called three blades tungsten carbide ball nose end mills. According to its use can be divided into general-purpose end mills and high-speed processing of stainless steel / superalloy end mill two kinds. Universal three blade tungsten carbide ball nose end mill grades have MG-3BA40S, MG-3BA40L and MG-3BA40X like. Universal three ball tungsten carbide cutter blade length series of short series S-, L- long series and X- extended series three, the end of the blade in the form of both over the center of the helix angle of 40 °. Universal three blade carbide ball nose end mill suitable for use on steel, stainless steel, cast iron, etc. milling.

Universal Edged Tungsten Carbide Ball Nose End Mills

Having two teeth, in the form of straight shank handle, cutter head for the ball tungsten carbide ball nose end mills called edged tungsten carbide end mills. Universal edged tungsten carbide ball nose end mills can be divided in accordance with general-purpose end mills, end mills economical, high-speed machining of hardened materials mills, high-speed machining of stainless steel / high-temperature alloy cutter. Universal edged tungsten carbide ball nose end mill grades have MG-2BA30M, MG-2BA30L and MG-2BA30X like. Universal edged tungsten carbide ball nose end mills standard length series M- series, L- long series and X- extended series three, the end of the blade in the form of both over the center of the spiral angle of 30°. Universal edged tungsten carbide ball nose end mill suitable for HRC≤50 (HB460) of steel, stainless steel, cast iron, etc. milling.

Universal Multi-blade Straight Shank Tungsten Carbide End Mills

5,6,8 and many have teeth, in the form of straight shank handle, cutter head for the ball head or flathead tungsten carbide end mills called multi-blade straight shank tungsten carbide end mills. Divided according to use is divided into two kinds of general-purpose and economical. Universal multi-blade straight shank tungsten carbide end mill grades have MG-MEA40M and MG-MEA40L like. Multi-blade straight shank tungsten carbide end mills standard length series M- series and series two L- long, the end of the form, but the center of the blade, spiral angle of 40 °. Universal multi-blade straight shank tungsten carbide end mill suitable for HRC≤50 (HB460) of steel, stainless steel, cast iron, etc. milling.

Four Blade Straight Shank Tungsten Carbide Ball Nose End Mills

Four blade straight shank tungsten carbide ball nose end mill is a kind of four teeth, in the form of straight shank shank, head for the ball head cutter tungsten carbide end mills. Universal four blade straight shank tungsten carbide ball nose end mill grades have MG-4BA35M, MG-4BA30M, MG-4BA30L and MG-4BA30X four. MG-4EA35M and MG-4BA30M standard length series M-series, MG-4BA30L and MG-4BA30X length of the series were a long series of L- and X- extended family, they form an end edge over all four edges center. MG-4EA35M type milling cutter spiral angle of 35 °, MG-4BA30M, MG-4BA30L and MG-4BA30X helix angle of 30 °. Four-blade straight shank tungsten carbide ball nose end mills versatile, suitable for HRC≤50 (HB460) of steel, stainless steel, cast iron, etc. milling.

Three Blade Circular Head Tungsten Carbide End Mills

Three blade straight shank tungsten carbide ball nose end mill is a kind of three teeth, in the form of straight shank handle, cutter head for the ball head or flathead tungsten carbide end mills. Can be divided in accordance with general-purpose end mills and high-speed processing of stainless steel / high-temperature alloy cutter. Three blade straight shank tungsten carbide ball nose end mill grades have MG-3TA50M MG-3TA40M two. Their length M- series are standard series, but its end is the center of the blade form. MG-3TA50M type milling cutter helix angle of 50 °, while the MG-3TA40M helix angle of 40 °. Three blade straight shank tungsten carbide ball nose end mill suitable for HRC≤50 (HB460) of steel, stainless steel, cast iron, etc. milling.

Edged Straight Shank Tungsten Carbide Ball Nose End Mills Introduction

MG-2BA35M edged straight shank tungsten carbide ball nose end mill is a kind of two teeth, in the form of straight shank shank tungsten carbide end mill cutter head for the ball head. MG-4EA35M type edged straight shank tungsten carbide ball nose end mill series M- length standard series, which ends in the form of a two-edged blade over center. Two tooth carbide milling cutter center, cylindrical ball nose end mill is 0.1 × 45 °, helix angle of 35 °. MG-4EA35M type edged straight shank tungsten carbide ball nose end mills versatile and can be used to HRC≤50 (HB460) of steel, stainless steel, cast iron and other processing.

Cheap Four-blade Straight Shank Tungsten Carbide End Mills

Has four teeth, in the form of straight shank handle, cutter head for the ball head or flathead tungsten carbide end mills called economical four-blade straight shank tungsten carbide end mills. Four blade straight shank tungsten carbide end mills can be divided according to their use economical general purpose end mills and milling cutter types. Cheap four-blade straight shank tungsten carbide end mill grades have ME-4EA30S ME-4EA30M two. ME-4EA30M economical four-blade straight shank tungsten carbide end mills standard length series M- series, and ME-4EA30S type milling cutter length series is S- short series, both ends of a double-edged blade form too center, helix angle is 30 °. Cheap four-blade straight shank tungsten carbide end mill suitable for HRC≤40 steel, stainless steel, cast iron.

Cheap Three Blade Straight Shank Tungsten Carbide End Mills

Cheap three blade straight shank tungsten carbide end mill is a kind of three teeth, in the form of straight shank handle, cutter head for the ball head or flathead a tungsten carbide end mills. Three blade straight shank tungsten carbide end mills can be divided according to their use economical general purpose end mills and milling cutter types. Cheap three blade straight shank tungsten carbide end mill grades have ME-3EA40S, ME-3EA40M, ME-3EA30M and ME-3EA30L. Cheap three straight shank tungsten carbide end mill blade length series standard series M-, L- and S- long series of short series of three, the end of the blade in the form of both over-center, helix angle 40 ° and 30 ° have . Cheap three blade straight shank tungsten carbide end mill suitable for HRC≤40 steel, stainless steel, cast iron.

Cheap Edged Straight Shank Tungsten Carbide End Mills

Cheap edged straight shank tungsten carbide end mill is a kind of two teeth, the form can be straight shank handle, cutter head for the ball head or flathead a tungsten carbide end mills. Edged straight shank tungsten carbide end mills can be divided according to their use economical mills, end mills and high-speed general-purpose machining aluminum alloy cutter. Cheap edged straight shank tungsten carbide end mill grades have ME-2EA30M and ME-2EA30L like. Cheap edged straight shank tungsten carbide end mills standard length series M- series, L- long series two, the end of the blade in the form of over-center, helix angle of 30 °. Cheap edged straight shank carbide end mill suitable for HRC≤40 steel, stainless steel, cast iron.

High-speed Machining Head With Four Blade Circular Tungsten Carbide End Mills

High-speed machining head with four-blade circular tungsten carbide end mill is a kind of four teeth, the head of the arc cutter head carbide end mills, because they are named for high-speed machining. High-speed machining with four-blade circular tungsten carbide end mill head grades have MH-4TA20M, MH-4TA28M, MH-4TA28L and MH-4TA28X four. Their length series are standard series M- and L- long series and X- extended family, are in the form of its end edge over center shank forms are straight shank, which are, respectively, the helix angle of 20 ° and 28 °. High-speed machining head with four-blade circular tungsten carbide end mills for steel, cast iron and hardened steel, high-speed milling.

High-speed Machining Head With Three Blade Circular Tungsten Carbide End Mills

High-speed machining head with three blade circular tungsten carbide end mill is a kind of three teeth, tungsten carbide end mill cutter head to head in an arc. Can be divided according to use high-speed processing mills, end mills and high-speed general-purpose processing of stainless steel / high-temperature alloy cutter. High-speed machining with three circular blade cutter head carbide grades are MP-3TA40M and MP-3TA40L two kinds. Their length series are standard series M- and L- long series, but its end is the center of the blade form, in the form of straight shank shank. Its helix angle are 40 °. High-speed machining with three blade circular head suitable for tungsten carbide end mills for steel HRC <48 and a cast of high-speed milling.