Water-Soluble Tungsten Carbide Cutting Fluid Classification

Tungsten carbide cutting fluid into an aqueous solution of water-soluble, synthetic cutting fluid emulsion and three.

Solution: adding rust is soft water-based agents, antifungal agents, has good cooling effect. Some of the oil was added an aqueous solution of an additive, a surfactant aqueous solution is transparent, in order to enhance lubricity and cleaning properties. Further, when the extreme pressure antiwear agent is added can be achieved by increasing the strength of the lubricant film at high temperature and high pressure. Solution commonly used in roughing and ordinary grinding.

Emulsion: a stirred mixture of water and then emulsified oil, milky white liquid formation. Use of the emulsion is very wide, can be formulated their own, with less emulsified oil emulsion called low concentration, it is mainly cooling effect for roughing and general grinding; major high concentration emulsion lubricant for finishing and processing of complex tool.

Synthetic cutting fluid: high performance at home and abroad to promote the use of cutting fluid, which is composed of water, various surface active agents, and chemical additives, it has good cooling, lubrication, cleaning and anti-rust, good thermal stability, long cycle and so on. Synthetic cutting fluid is not oil, can save energy, environmentally friendly, and abroad in high usage.