Face Milling Cutter Applications

Results: The usual practice is to cemented carbide milling on the front on the cutting edge machining plane (plat land), cemented carbide milling clamping on the machine, to be processed very difficult to 0.01mm below. However, if the use of micro cemented carbide milling, grinding, assembly as long as the cemented carbide milling Vice behind unflatness will be absorbed, the cemented carbide milling 's cutting edge will form an ideal arrangement, thereby enhancing hard the accuracy of the machined surface of cemented carbide milling cutter. And the assembly is relatively simple, can significantly improve the efficiency of the cemented carbide milling.

Summary: In order to improve the accuracy of the machining surface, in the front processing plane is the general practice, but because of the assembly with the bad unevenness and tilt occur during grinding can not be guaranteed to be able to achieve the accuracy requirements. Fillet micro cemented carbide milling use front-end, will be able to improve the machining accuracy.