Tungsten Carbide Cutting Tool Basic Rules of Procedure

Tungsten carbide cutting tool cutting process is through cutting exercise, like cut fruit to eat the rind cut off as cemented carbide cutting tools from excess metal layer formed on the workpiece cut chips and machined surfaces, this process of carbide cutting tools deformation, the formation of the chip, resulting in cutting force, cutting heat and cutting temperature, cutting tool wear, and many other phenomena. If the cut off peel back the original fruit roll back on, or you can fight together in accordance with the original look. However, carbide cutting tools cutting metal, especially in the continuous cutting of steel, the chip will not be as it is rolled up. Not because the chip is too hard, but because of the length of the chip will produce change's sake.

Chip shape under different cutting elements are also different. The thickness of the chip is several times the original, and a fraction of the length of the chip original. So, with a cutting speed obtained by cutting the chip, the chip is equivalent to a fraction of the cutting speed is produced.

After forming the shape of chips based on different shear slip cutting tools, chip into ribbon cuttings, festival-like chips, granular chip, chipping four types of chips.